C6 Shift Knob Adaptor for C5?
Thread Starter
Burning Brakes
Joined: Jan 2002
Posts: 885
Likes: 0
From: The Woodlands Texas
C6 Shift **** Adaptor for C5?
Looking to see if anyone has made an adaptor to mount the OEM C6 manual shift **** on the OEM C5 manual shifter (I have a Hurst billet shifter but same install as OEM).
Safety Car
Joined: Apr 2007
Posts: 3,586
Likes: 0
From: Lynn Haven, FL Sunshine State
St. Jude Donor '08
Just use some force and fist fk it on there... it won't snug tight tight, but will be tight enough to work. I cut off the little set screw plastic part on the bottom with my dremel also.
Le Mans Master
Joined: Dec 2005
Posts: 8,475
Likes: 332
From: Port Arthur, Texas 77642
Not much really, some new "Maggie Style" coil pack covers are at the body shop now getting glassed & painted RED along with some RevXtreme billet fuel rails with stainless hardware for some underhood "kick". I'll apply some decals to the coil pack covers till I have a decign for airbrushing on...I think you'll like it 
Also have an 02 C5Z at 21st CMC near Dallas getting trach prepped to start my NEW endeavor
Also have an 02 C5Z at 21st CMC near Dallas getting trach prepped to start my NEW endeavor
Night Owl for life
Joined: Nov 2003
Posts: 24,725
Likes: 4,564
From: Bugs Bunny should'a made a left turn here
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Gonna keep modding it too for a "road warrior", not that I will break any traffic laws 
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
This is a GS Creations C6 **** for the C5 I just mounted to an MGW shifter last weekend. It has a plastic insert with a flat on one side of the inside diameter. You basically cut new threads in the flat side by forcefully screwing the **** on (that sounded bad 
).
).
Drifting
Joined: Feb 2007
Posts: 1,993
Likes: 7
From: LaPine Oregon
Race Director
Joined: Dec 2007
Posts: 15,037
Likes: 1
From: Harker Heights, TX
St. Jude Donor '09-'10
Just FYI -
I ordered this **** on 9/11/2008 and the order still says pending. No emails as to why, no response to the emails I sent them via their site, and no phone number to call on their site that I could find.
I ordered this **** on 9/11/2008 and the order still says pending. No emails as to why, no response to the emails I sent them via their site, and no phone number to call on their site that I could find.
