Ignition Switch Problem?
Advanced
Joined: Apr 2007
Posts: 93
Likes: 0
From: Conroe Texas
I need help please
I accidentally broke my key off in the ign switch. In trying to fish it out I damaged the security contacts for the resistor on the key. I bought a whole second hand ign switch from ebay and installed it and everything worked except the starting. like turning the key all the way with the clutch out, I then took the contact and wires off of the new unit and put them on my old unit but before installing I checked resistance and it read 2.36 or key number 8. I cannot figure what happened, can u shed some lite on my situation. Is there some kind of dance routine like turn left blinker on, press gas pedal 3 times while pushing the windshield washer and turning the steering 183 degrees from north? hehehehehhe
Mike
mike4man@gt.rr.com
I can give u a call if necessary.
Mike
mike4man@gt.rr.com
I can give u a call if necessary.
1st Gear
Joined: Oct 2014
Posts: 1
Likes: 0
Ignition repair
After reading all to post on rebuilding the ignition dnd the step on removing it I decided to take this on myself I didn't rebuild it but did purchase a new one and install it in no time and BAM perfect thanks Bill for all you post on this topic
Last edited by phonetec3373; Apr 19, 2016 at 05:47 PM.
