MS3 or MS4
Thread Starter
Burning Brakes
Joined: Sep 2008
Posts: 899
Likes: 18
From: Austin Texas
MS3 or MS4
I have an 02 z06 with stock heads, longtubes, ported t-body and a vararam, would I be better off with the ms3 over the ms4. I know a at some point with too big of a cam you start to lose power if your heads cant support it. Which cam should i go with and what numbers should i expect witheach cam
Thread Starter
Burning Brakes
Joined: Sep 2008
Posts: 899
Likes: 18
From: Austin Texas
Drifting
Joined: Feb 2008
Posts: 1,765
Likes: 2
From: St. Clair Shores Mi
i DD drove my vette with a ms4 only and had no probs driving it in traffic/city - after one day of driving it you get used to it. there was a lil cam surge under 1700rpms, which is a easy fix with 3.90/4.10 
Thread Starter
Burning Brakes
Joined: Sep 2008
Posts: 899
Likes: 18
From: Austin Texas
I called tsp and they said there's only a 6hp difference in the 3 and 4. They also said the ms3 drives much better on the street and I should consider a torquer cam. I think the ms3 is the way im going to go. Im going to drive my car on the street for the most part and i dont think 6hp is worth fighting in a difficult cam on the street.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
