Alignment specs??
Melting Slicks
Joined: Mar 2001
Posts: 2,126
Likes: 8
From: Dallas, TX
Re: Alignment specs?? (Glennm27)
Here is a copy of the Z06 specs from Ken Fitchner's weekly newsletter :cheers:
Z06 Wheel Alignment Specifications
Front Alignment Specs Service Allowable Service Preferred
Front Individual Toe +0.14 to –0.06 degrees +0.04 degrees
Front Sum Toe +0.28 to –0.12 “ +0.08 “
Front Individual Camber +0.50 to –0.70 “ -0.20 “
Front Cross Camber +/- 0.25 “ within 0.50 “
Front Individual Caster +6.4 to +7.4 “ 6.9 “
Front Cross Caster +/- 0.25 “ within 0.50 “
Steering Wheel Angle +1.0 to –1.0 “ 0.00 “
Rear Alignment Specs Service Allowable Service Preferred
Rear Individual Toe +0.09 to –0.11 degrees -0.01 degrees
Rear Sum Toe +0.18 to –0.22 “ -0.02 “
Rear Thrust Angle +0.10 to – 0.10 “ 0.00 “
Rear Individual Camber +0.32 to –0.68 “ -0.18 “
Rear Cross Camber -- within 0.50 “
Z06 Wheel Alignment Specifications
Front Alignment Specs Service Allowable Service Preferred
Front Individual Toe +0.14 to –0.06 degrees +0.04 degrees
Front Sum Toe +0.28 to –0.12 “ +0.08 “
Front Individual Camber +0.50 to –0.70 “ -0.20 “
Front Cross Camber +/- 0.25 “ within 0.50 “
Front Individual Caster +6.4 to +7.4 “ 6.9 “
Front Cross Caster +/- 0.25 “ within 0.50 “
Steering Wheel Angle +1.0 to –1.0 “ 0.00 “
Rear Alignment Specs Service Allowable Service Preferred
Rear Individual Toe +0.09 to –0.11 degrees -0.01 degrees
Rear Sum Toe +0.18 to –0.22 “ -0.02 “
Rear Thrust Angle +0.10 to – 0.10 “ 0.00 “
Rear Individual Camber +0.32 to –0.68 “ -0.18 “
Rear Cross Camber -- within 0.50 “
