When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It is the Flux capacitor and requires 1.21 jiggawatts to operate. Or...it could be a motor assembly for a step lowering setup for a full size truck. Looks heavy duty enough to hold an obese American.
From: Dear Karma, I have a list of people you missed.
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
Originally Posted by spdracr39
Looks too heavy duty for window lift I would go with convertible top motor assy.
Originally Posted by Oldvetter
Looks like it has very limited motion, so I say maybe a trunk pulldown motor.
The limited range of motion and gear reduction design seems like it's meant for moving something heavy. I would say either convertible top motor or retractable hardtop/roof motor. Maybe a power tailgate/lift gate actuator. The trunk pulldown motors I have seen are usually of an in-line screw actuator design and don't rely on a "swing" arm actuator.
The limited range of motion and gear reduction design seems like it's meant for moving something heavy. I would say either convertible top motor or retractable hardtop/roof motor. Maybe a power tailgate/lift gate actuator. The trunk pulldown motors I have seen are usually of an in-line screw actuator design and don't rely on a "swing" arm actuator.