BBK vs LS6 Intake
Thread Starter
Advanced
Joined: Jun 2009
Posts: 97
Likes: 0
From: Gallatin Tennessee
BBK vs LS6 Intake
Can anyone tell me which intake is better for my 99 Vette... the LS6 or a BBK SSI series (LS1 LS6) intake. Both are used and appear in, like new condition. It looks like the BBK may end up costing $100 or more, than the LS6. If the BBK is better, is it worth the extra money.
Premium Supporting Vendor
Joined: Aug 2008
Posts: 186
Likes: 1
From: TEXAS!
You can find slightly used LS6 intakes in the classifieds forums here and on other forums for about $300 or so all the time. You can't go wrong with the LS6 for the money. I'm not a big fan of the BBK.
__________________
COMP - FAST - PACESETTER - CALLIES - COMETIC GASKETS - MONSTER CLUTCHES - MOSER ENGINEERING - KOOKS
ARP - GM BOLTS AND GASKETS - MSD - NGK - POWERBOND - WISECO - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / Largest LS-x Comp Cams Distributor in the Country!
COMP - FAST - PACESETTER - CALLIES - COMETIC GASKETS - MONSTER CLUTCHES - MOSER ENGINEERING - KOOKS
ARP - GM BOLTS AND GASKETS - MSD - NGK - POWERBOND - WISECO - ASP - AND MORE!
Banned Scam/Spammer
Joined: May 2007
Posts: 15,685
Likes: 1,330
From: Machineguns, because I don’t compromise
I have polished Weiand/Lingenfelter intake because of my overall engine... otherwise I would have kept the LS6. The Weiand does have more torque compared to the factory oem... No dyno sheets, just perception.
Not sure how the BBK is made internally, I think it's one ugly intake on the outside, I'd never buy one.
Not sure how the BBK is made internally, I think it's one ugly intake on the outside, I'd never buy one.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Instructor
Joined: May 2009
Posts: 101
Likes: 4
From: ft wayne indiana
only reason i ran a aluminum intake was due to having burst panels for nitrous. it was a weiand that i had port matched and opened up to accept 85mm tb. that being said an ls6 would be just fine and if its cheaper there is your answer. btw several test were done as far as heat soak.... i wont give my opinion
4th Gear
Joined: Apr 2011
Posts: 4
Likes: 0
Lucky, you do realize that this forum gets new members everyday. I think you've been around so long that you know all the answers to the questions that the new guys have. So instead of being sarcastic, just move on and let someone else answer.
Tech Contributor
Joined: Jan 2007
Posts: 19,449
Likes: 1,155
From: Dyer, IN
