Official ATI Registry
Thread Starter
Melting Slicks
Joined: Dec 1999
Posts: 2,041
Likes: 697
From: Tulsa, Ok
Official ATI Registry
This thread will serve as the official C5 ATI registry. The below poll will be left open
for users to add new choices in the poll. Please only vote once for installed or on order
We don't need to know when your order came in, just that you have one or one on the way.
But please post problems encountered.
Clark
for users to add new choices in the poll. Please only vote once for installed or on order
We don't need to know when your order came in, just that you have one or one on the way.
But please post problems encountered.
Clark
Team Owner
Joined: Jun 2001
Posts: 55,394
Likes: 1
Re: Official ATI Registry (imxz28)
Good Poll!!! But owners will not be able to vote as an LS1 ATI OWNER (OR LS6) and also vote "KEYED BALANCER" Because the forum poll restriction will only let you vote once. Just thought you should know. If there is a way to redo it, this might be an option:
LS1 KEYED BALANCER
LS1 - DID NOT KEY BALANCER
LS6 KEYED BALANCER
LS6 DID NOT KEY BALANCER
Sorry, don't mean to be such a hard-headed perfectionist
[Modified by Ha-Ha, 12:14 PM 2/27/2002]
[Modified by Ha-Ha, 12:15 PM 2/27/2002]
[Modified by Ha-Ha, 12:16 PM 2/27/2002]
LS1 KEYED BALANCER
LS1 - DID NOT KEY BALANCER
LS6 KEYED BALANCER
LS6 DID NOT KEY BALANCER
Sorry, don't mean to be such a hard-headed perfectionist
[Modified by Ha-Ha, 12:14 PM 2/27/2002]
[Modified by Ha-Ha, 12:15 PM 2/27/2002]
[Modified by Ha-Ha, 12:16 PM 2/27/2002]
Pro
Joined: Sep 1999
Posts: 706
Likes: 38
From: Charlottesville VA
Re: Official ATI Registry (Ha-Ha)
I have one on order, but the bottom end won't be stock LS1, it will be all bore 382 or 422/427 because I'm already running stage 2 heads @ 10.8 compression and my cam is all wrong for a blower setup.
Still trying to figure out if stroking and blowing is a good combination (on an engine that is ;) ) for a long engine life, vs just doing all bore.
Still trying to figure out if stroking and blowing is a good combination (on an engine that is ;) ) for a long engine life, vs just doing all bore.
Thread Starter
Melting Slicks
Joined: Dec 1999
Posts: 2,041
Likes: 697
From: Tulsa, Ok
Re: Official ATI Registry (Ha-Ha)
Ha-Ha, I didn't know about the one vote per thread rule.
Well, let's just leave those details for the coment section.
So owners, please post comments within if you can.
Well, let's just leave those details for the coment section.
So owners, please post comments within if you can.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Thread Starter
Melting Slicks
Joined: Dec 1999
Posts: 2,041
Likes: 697
From: Tulsa, Ok
Re: Official ATI Registry (eikeland)
Hi Richard (eikeland),
You mentioned that you would try to get some pics posted of the keyed hub :D
Could you humble us and tell where they are posted. And if you have not gotten to it
yet :cry
Or anyone else have a camera that could show us what this mod looks like :confused:
Thanks in advance,
Clark
You mentioned that you would try to get some pics posted of the keyed hub :D
Could you humble us and tell where they are posted. And if you have not gotten to it
yet :cry
Or anyone else have a camera that could show us what this mod looks like :confused:
Thanks in advance,
Clark
Advanced
Joined: Nov 2001
Posts: 88
Likes: 0
From: Grant FL
Re: Official ATI Registry (KILBY)
I have one on order. I need help with keying the crank. I hope to install myself but need info on keying.
Thanks
Thanks
Dave
02 Z06
02 VTX1800
01 GSXR1000
00 R1
Racer
Joined: Dec 2001
Posts: 353
Likes: 0
From: Boca Raton FL
Re: Official ATI Registry (imxz28)
Hi Richard (eikeland),
You mentioned that you would try to get some pics posted of the keyed hub :D
Could you humble us and tell where they are posted. And if you have not gotten to it
yet :cry
Or anyone else have a camera that could show us what this mod looks like :confused:
Thanks in advance,
Clark
You mentioned that you would try to get some pics posted of the keyed hub :D
Could you humble us and tell where they are posted. And if you have not gotten to it
yet :cry
Or anyone else have a camera that could show us what this mod looks like :confused:
Thanks in advance,
Clark
I need to get under the car to get a good picture.
Sorry but it has to wait lite longer... :(
Richard
Race Director
Joined: Mar 2001
Posts: 14,480
Likes: 132
From: PA
Re: Official ATI Registry (eikeland)
I also have a supercharger with a keyed crank, but unfortunately I don't have an ATI kit so I guess I don't belong. :sad: Oh well, maybe someone will start an official Vortech registry someday. (sigh)
Team Owner
Joined: Jun 2001
Posts: 55,394
Likes: 1
Re: Official ATI Registry (QuickSilver97)
Hey QUICKSILVER,
Actually, the thing to do would be to create a separate FI/Nitrous section, like the LS1 Forum. I and man others have requested this. Frankly, I'm not quite sure of the reasoning why they aren't doing this.Perhaps they just don't want to copy another forum but whats wrong with implementing someone else's idea, especially if its justified? With the FI systems starting to come full circle (well, not quite but its getting there) for the Vettes, it just doesn't make sense not to do this. :confused: :confused:
Actually, the thing to do would be to create a separate FI/Nitrous section, like the LS1 Forum. I and man others have requested this. Frankly, I'm not quite sure of the reasoning why they aren't doing this.Perhaps they just don't want to copy another forum but whats wrong with implementing someone else's idea, especially if its justified? With the FI systems starting to come full circle (well, not quite but its getting there) for the Vettes, it just doesn't make sense not to do this. :confused: :confused:
Thread Starter
Melting Slicks
Joined: Dec 1999
Posts: 2,041
Likes: 697
From: Tulsa, Ok
Re: Official ATI Registry (Dave2)
I will post my solution to keying next week.
Dave
Dave
That would be great. Can you post it in this thread ??
If not, Please email me the thread you do post in.
Thread Starter
Melting Slicks
Joined: Dec 1999
Posts: 2,041
Likes: 697
From: Tulsa, Ok
Re: Official ATI Registry (imxz28)
I will post my solution to keying next week.
Dave
Dave,
That would be great. Can you post it in this thread ??
If not, Please email me the thread you do post in.
Dave
Dave,
That would be great. Can you post it in this thread ??
If not, Please email me the thread you do post in.