Bellhousing dowels
Thread Starter
Racer
Joined: Aug 2003
Posts: 348
Likes: 1
From: Sacramento CA
Bellhousing dowels
Has anyone ever had to install these before? I have a new LS3 block, and I have a new set of dowels for the bellhousing. They seem to be slightly to large for the block, but the perfect size for the bellhousing. Any ideas?
Race Director
Joined: May 2005
Posts: 15,960
Likes: 21
From: West Norriton PA
St. Jude Donor '08
There should be some resistance in installing them as they are meant to help hold the bell housing in place. (i.e. They are press fitted).
Just make sure you don't knock them into far.
