passenger window
Thread Starter
Cruising
Joined: Feb 2010
Posts: 12
Likes: 0
From: Redding CA
passenger window
Hello all,
I have an 04 conv. The passenger window does not go up/down (it's up right now-yeah). What else could the problem be besides fuse, motor, cable assy, or window assy, or window sticking? I physically tried to make it go up/down & jiggled wires per advice to no avail. There is a clicking sound when I press on up/down on both doors.
Thanks in advance!
Jill
I have an 04 conv. The passenger window does not go up/down (it's up right now-yeah). What else could the problem be besides fuse, motor, cable assy, or window assy, or window sticking? I physically tried to make it go up/down & jiggled wires per advice to no avail. There is a clicking sound when I press on up/down on both doors.
Thanks in advance!
Jill
Pro
Joined: Apr 2005
Posts: 666
Likes: 5
From: Mt. Pleasant SC
Very common problem. Since you are hearing a clicking sound the motor is probably stuck. There is a temporary workaround that sometimes works. Bang on the door or slam the door while pressing the down button. That may free it up temporarily, but the only fix is to replace the motor/regulator assembly. There are good procedures for that here on the forum if you do a search.
Drifting
Joined: Jan 2005
Posts: 1,650
Likes: 2
From: Bakersfield Ca
Read this post of mine and see if it will help you. There is also a connector inside the rubber boot at the door jam that has been known to cause problems. That too is explained in my post. Good luck. 
http://forums.corvetteforum.com/c5-g...w-problem.html
http://forums.corvetteforum.com/c5-g...w-problem.html
Instructor
Joined: Dec 2008
Posts: 112
Likes: 0
From: Wichita Falls Texas
I found corrosion in the connector on the motor of my passenger side window yesterday, sprayed it with contact cleaner and it now works fine. During my troubleshooting I also removed the 4 torx head screws off the back of the motor and was able to rotate the armature by hand and move the window up and down. This had nothing to do with my fix but could help you determine if your motor is sticking or if there are other mechanical issues.
