Another Powerloader Question
Thread Starter
Melting Slicks
Joined: Jun 2001
Posts: 2,743
Likes: 3
From: Davie Florida
Another Powerloader Question
I just got my Powerloader back from TTS after I sent it back to be reprogramed for a converter and 3.42s. For some reason my car is now shifting at a little over 5500 RPM
instead of the 6000 RPM it was shifting at previously. Can I use a Hypertech to make the shift points higher without disturbing the rest of Powerloader Program? I really don't want to send the Powerloader back again since it just took me 5 months to get it back.
98 A4 Metalic Purple
Powerloaded
172 t.stat
Donaldson Blackwing
Pro Torque 2400
3.42 gears
:confused:
[Modified by Mitch C, 6:09 AM 3/10/2002]
instead of the 6000 RPM it was shifting at previously. Can I use a Hypertech to make the shift points higher without disturbing the rest of Powerloader Program? I really don't want to send the Powerloader back again since it just took me 5 months to get it back.
98 A4 Metalic Purple
Powerloaded
172 t.stat
Donaldson Blackwing
Pro Torque 2400
3.42 gears
:confused:
[Modified by Mitch C, 6:09 AM 3/10/2002]
Safety Car
Joined: Aug 2000
Posts: 4,154
Likes: 1
From: Murphy TX
Cruise-In II Veteran
Re: Another Powerloader Question (Mitch C)
It sounds like your shift points were not raised. I don't think the HPP3 (or any other programmer for that matter) writes only selective parts of the data segment.
Melting Slicks
Joined: Aug 2000
Posts: 2,112
Likes: 2
From: Sindelfingen Germany
Re: Another Powerloader Question (Mitch C)
I just got my Powerloader back from TTS after I sent it back to be reprogramed for a converter and 3.42s. For some reason my car is now shifting at a little over 5500 RPM
instead of the 6000 RPM it was shifting at previously. Can I use a Hypertech to make the shift points higher without disturbing the rest of Powerloader Program? I really don't want to send the Powerloader back again since it just took me 5 months to get it back.
instead of the 6000 RPM it was shifting at previously. Can I use a Hypertech to make the shift points higher without disturbing the rest of Powerloader Program? I really don't want to send the Powerloader back again since it just took me 5 months to get it back.
For me another reason not to order a poweroader :mad
Frederik
[Modified by C5 Frederik, 11:52 PM 3/10/2002]
Racer
Joined: Oct 2000
Posts: 427
Likes: 0
From: Lumberton TX
Re: Another Powerloader Question (DUKE)
HELL! I been waiting since October for a reprogram!!!! :mad
I hear what your saying and IF I ever get the PLL ll back I wonder if it WILL be programed right? :smash: I'd hate to have to go thru all this again :seeya
I hear what your saying and IF I ever get the PLL ll back I wonder if it WILL be programed right? :smash: I'd hate to have to go thru all this again :seeya
