THOSE USEING LS1-EDIT PLEASE CHECK IN....
Thread Starter
Burning Brakes
Joined: May 2000
Posts: 872
Likes: 0
From: Cropwell AL
THOSE USEING LS1-EDIT PLEASE CHECK IN....
In order to begin a knowledge base, and share info, it would be helpful to know who is useing LS1edit. Would you please list your flash files that you have? I have flash for Protorque 2400 + the files off the LS1edit repository.Would like to check with someone about the multiplier in setting up SVO30# injectors in PCM.
Le Mans Master
Joined: Jan 2001
Posts: 6,429
Likes: 1
From: God's Replica
Re: THOSE USEING LS1-EDIT PLEASE CHECK IN.... (DUKE)
sent ya mail :D
:cheers:
58 is ls1 psi and 39 is fords.
58/39 =1.4871
1.4871 sqrt = 1.2194
1.2194 x 30 = 36.6
36.6/your injector rating. Mine is about 28.6
so 36.6/28.6 = 1.28
take that number and mulitply it to the injector values.
[Modified by intel55, 12:48 PM 3/10/2002]
:cheers:
58 is ls1 psi and 39 is fords.
58/39 =1.4871
1.4871 sqrt = 1.2194
1.2194 x 30 = 36.6
36.6/your injector rating. Mine is about 28.6
so 36.6/28.6 = 1.28
take that number and mulitply it to the injector values.
[Modified by intel55, 12:48 PM 3/10/2002]
Thread Starter
Burning Brakes
Joined: May 2000
Posts: 872
Likes: 0
From: Cropwell AL
