Broken bumper/rad support?
Thread Starter
Heel & Toe
Joined: Jun 2010
Posts: 16
Likes: 0
Broken bumper/rad support?
New Vette owner here. My drivers side headlight sits a little low in body, and I actually have a replacement cover as there is a hairline crack. That's not the issue as I am pretty sure I can stick a washer under the motor assembly and even everything out. Anyway it got me to looking under the car and I noticed that the metal front bumper/radiator support is broken and bent about 35 degrees inward on the drivers side. I can tell that it was not an unknown accident as it obviously happened on the bumper that is currently on there since the little painted plastic piece underneath is broken as well. No big deal just wondering what could have caused this (slamming down too hard maybe?) and if anyone thinks it could cause me any problems. Here is the part that is broken/bent. However, everything seems to be in place and sturdy.
http://cgi.ebay.com/ebaymotors/ws/eB...d=380237283557
http://cgi.ebay.com/ebaymotors/ws/eB...d=380237283557
