2001-2004 Corvette Keyless Entry Instructions
Thread Starter
2nd Gear
Joined: Sep 2010
Posts: 2
Likes: 0
2001-2004 Corvette Keyless Entry Instructions
I need the keyless entry instructions for GM /LEAR 25695954, 2001-2004 Corvette.
I bought a key fob years ago and miss placed it. I found it but can't find the instructions.
WORKS WITH:
2001, 2002, 2003 and 2004 Chevrolet Corvette and
Corvette ZO6, Z06, 50th Anniversary Corvette.
2001, 2002, 2003 Pontiac Grand Am, Bonneville SSEi,
Chevrolet Monte Carlo LS and SS, Impala LS, Malibu,
Oldsmobile Alero, Aurora, Buick Lesabre and Cadillac.
I bought a key fob years ago and miss placed it. I found it but can't find the instructions.
WORKS WITH:
2001, 2002, 2003 and 2004 Chevrolet Corvette and
Corvette ZO6, Z06, 50th Anniversary Corvette.
2001, 2002, 2003 Pontiac Grand Am, Bonneville SSEi,
Chevrolet Monte Carlo LS and SS, Impala LS, Malibu,
Oldsmobile Alero, Aurora, Buick Lesabre and Cadillac.
Drifting
Joined: Feb 2007
Posts: 1,793
Likes: 7
From: Santa Maria Ca.
Try this,and if it doesn't work,email the place you bought the remote and have them email you the instructions for their particular fob.
KEYFOB PROGRAMMING: (from owners manual)
1) Turn ignition on
2) Turn radio off
3) Press Driver Information Center (DIC) RESET button ( 6 )
4) Press OPTIONS button on the DIC until display is blank ( 4 )
5) Press and hold RESET button for 3 seconds ( 6 )
6) Press OPTIONS button until FOB TRAINING is displayed ( 4 )
7) Press RESET button to begin programming sequence. ( 6 )
8) Simultaneously press and hold LOCK and UNLOCK ( A & B )
buttons on first remote for 13 seconds until message
appears stating programming is complete. The computer
will ask to program second FOB. If you don't have a second
FOB follow on to step 9.
9) Turn ignition off and remove key for ignition.
10) Test remote or remotes
KEYFOB PROGRAMMING: (from owners manual)
1) Turn ignition on
2) Turn radio off
3) Press Driver Information Center (DIC) RESET button ( 6 )
4) Press OPTIONS button on the DIC until display is blank ( 4 )
5) Press and hold RESET button for 3 seconds ( 6 )
6) Press OPTIONS button until FOB TRAINING is displayed ( 4 )
7) Press RESET button to begin programming sequence. ( 6 )
8) Simultaneously press and hold LOCK and UNLOCK ( A & B )
buttons on first remote for 13 seconds until message
appears stating programming is complete. The computer
will ask to program second FOB. If you don't have a second
FOB follow on to step 9.
9) Turn ignition off and remove key for ignition.
10) Test remote or remotes
Thread Starter
2nd Gear
Joined: Sep 2010
Posts: 2
Likes: 0
