Custom exhaust material
Thread Starter
Instructor
Joined: Dec 2009
Posts: 106
Likes: 1
From: Armstrong British Columbia
Custom exhaust material
Hey all I was wondering if anyone has ever dealt with www.mandrel-bends.com for supplies for an exhaust system.. I am here in canada and they are located in Washington state which is close and they also sell complete SS header fab kits for around $250 without manifold flange, as well as any bend needed. I wanted to do a single remote turbo design as they sell turbo flanges and flex piping too...Would appreciate any input or experience information would be greatly appreciated....
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Look on the C6 Tech section and find SPIN MONSTER's post on his new TURBO System install. The man is amazing and will most likely be able to recommend some shops, suppliers and Turbo fab info.
I looked it up for ypou and its posted below:
http://forums.corvetteforum.com/c6-t...-to-earth.html
I looked it up for ypou and its posted below:
http://forums.corvetteforum.com/c6-t...-to-earth.html
