did i lose a snapring!?!?!?!?!?
Thread Starter
Instructor
Joined: Jun 2008
Posts: 220
Likes: 0
From: Somers Point New Jersey
did i lose a snapring!?!?!?!?!?
I am about to put my drivetrain back together after having new torque tube couplers installed and balanced. I am looking at the rear end of the shaft and I see a groove about 2" in diameter that looks like it should hold a snapring to secure the bearing. Can anyone show me a pic of the rear end of their TT? PLEASE....
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Check out these two post. Its everything you ever wanted to kno about a rearend and how to make it better!!! YES, there should be a small metal ring in the Splined shafts. That what secure it in the CV Housing. Before you reinstall it, use a light and mirror and look in the CV Housing opening and see if it popped off.
- C5, Its Go Time, Output Shaft Install - Left and Right : http://forums.corvetteforum.com/c5-t...post1573404441
- C5 RAGTOPWS6, Differential UP-Grade; http://forums.corvetteforum.com/c5-g...-z06-guts.html
- C5, Its Go Time, Output Shaft Install - Left and Right : http://forums.corvetteforum.com/c5-t...post1573404441
- C5 RAGTOPWS6, Differential UP-Grade; http://forums.corvetteforum.com/c5-g...-z06-guts.html
Last edited by Bill Curlee; Feb 18, 2011 at 08:09 PM.
