Stall/Differential/Tabs Cooler install!
Thread Starter
Racer
Joined: Sep 2008
Posts: 375
Likes: 0
From: Dallas Texas
Stall/Differential/Trans Cooler install!
I just purchased a Yank 3800 stall and am also in the works of buying a 3.42 3-rib differential, and trans cooler for my 02. I'll be tackling the project myself and was curious if there was a walk through or any good DIY threads anyone has run across for an install similar to mine.
Thanks,
JR
Thanks,
JR
Last edited by Sick C5; Mar 25, 2011 at 01:06 AM.
Burning Brakes
Joined: Nov 2010
Posts: 1,112
Likes: 62
From: Chicago IL
This is what I used for my converter & diff swap..
http://www.corvettefever.com/howto/18978/index.html
http://www.corvettefever.com/howto/18978/index.html
Thread Starter
Racer
Joined: Sep 2008
Posts: 375
Likes: 0
From: Dallas Texas
I'll look into his posts. Thanks for the tip.
This is a great write up, thanks a lot! I'm sure it will come in handy when my install gets underway.*
Just curious, but what's the 4L60e capable of? Power wise? What's too much?
This is what I used for my converter & diff swap..
http://www.corvettefever.com/howto/18978/index.html
http://www.corvettefever.com/howto/18978/index.html
Just curious, but what's the 4L60e capable of? Power wise? What's too much?
