Multifunction Turn Signal Lever
#3
Melting Slicks
I have got to learn how to read an electrical schematic.
Thanks for drawing this up though, I've had issues with the contacts in that switch twice now.
Donnie
Thanks for drawing this up though, I've had issues with the contacts in that switch twice now.
Donnie
#4
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,180 Likes
on
1,583 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08
You just saved hundreds of people a LOT of time and headaches!
WELL DONE!!! Very creative!
When schematics are easier to use it allows people to feel better about doing their own self diagnosis and results in a positive outcome!
00Corvette
If you ever need help figuring them out,, just let us know.
The C5 schematics are not all that difficult to follow compared to the C6 schematics!
I'm well versed in reading schematics and I get a headache when I look at the C6 schematics. The engineers were smoking CRACK when they rendered those schematics!
Bill
WELL DONE!!! Very creative!
When schematics are easier to use it allows people to feel better about doing their own self diagnosis and results in a positive outcome!
00Corvette
If you ever need help figuring them out,, just let us know.
The C5 schematics are not all that difficult to follow compared to the C6 schematics!
I'm well versed in reading schematics and I get a headache when I look at the C6 schematics. The engineers were smoking CRACK when they rendered those schematics!
Bill
#5
Team Owner
Nice job Luck,......thanks.