Ti bypass in houston needed
Thread Starter
Racer
Joined: Aug 2010
Posts: 280
Likes: 0
From: Tyler Texas
Ti bypass in houston needed
I am looking for someone in Houston Texas to do a bypass on my titanium exhaust. Please let me know asap and a price. I would like for them to provide the pipe also. If someone knows were I can get the pipe let me know.
Thanks Larry
You can email me @ unruh_larry@yahoo.com
Or call me at 832-724-5779.
Thanks Larry
You can email me @ unruh_larry@yahoo.com
Or call me at 832-724-5779.
Race Director
Joined: Aug 1999
Posts: 15,299
Likes: 33
From: Houston Texas
Sure, let me dig it out. I got my Ti from another forum member. He ended up having enough to do 3 cars. I recommend posting in the Parts for Sale section. You can probably find some Ti. Also, there was a post in the Southwest section where I think a guy in Houston has some for sale.
BTW, this is a great mod and I'll think you will like it.
BTW, this is a great mod and I'll think you will like it.
Thread Starter
Racer
Joined: Aug 2010
Posts: 280
Likes: 0
From: Tyler Texas
Thanks for all the info. Yea I traded my borla for the TI becouse of the drone. I like the louder exhasut but not when it drones so bad you don't like to drive it. I have a kooks x pipe and mid tubes and I hope to score some kooks long tubes in the next few months. It should sound pretty good. Again thanks for the info. And I will look in the forum for the guy in houston.
Race Director
Joined: Aug 1999
Posts: 15,299
Likes: 33
From: Houston Texas
Larry,
The guy that did the Ti welding for us is named Mike. His shop is called Accufab. They are located in the north side of town off of 2920. He did the welding for two others and me. You can see pics of his work in our original thread below.
His website is www.accufabtx.com and his phone is 281-516-3210.
http://forums.corvetteforum.com/sout...i-exhaust.html
I"ve also heard good things about Roger and may need to see him to get one of my LT headers repaired.
The guy that did the Ti welding for us is named Mike. His shop is called Accufab. They are located in the north side of town off of 2920. He did the welding for two others and me. You can see pics of his work in our original thread below.
His website is www.accufabtx.com and his phone is 281-516-3210.
http://forums.corvetteforum.com/sout...i-exhaust.html
I"ve also heard good things about Roger and may need to see him to get one of my LT headers repaired.
Last edited by C5Longhorn; Jul 6, 2011 at 11:22 PM. Reason: Spelling
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Aug 2010
Posts: 280
Likes: 0
From: Tyler Texas
Always good to hear positive things about others work from members. I will check out both place and compare prices. I have a friend who can do it for me I just don't know when he will have a chance to do it and I hate asking for favors.
Melting Slicks
Joined: Jun 2007
Posts: 2,704
Likes: 4
From: Lone Star State
+1
Thread Starter
Racer
Joined: Aug 2010
Posts: 280
Likes: 0
From: Tyler Texas
Just a quick update. I fond a shop in Tomball Texas named Accufab off of FM 2920 who had performed several TI bypass mode in the past for forum members. I took Mike my TI Pipe and Mufflers. Dropped them off on Friday night (thanks for meeting me after hours) and had them back Saturday after noon. The work looks great and the price was fair as well. I paid Mike $175 and he did all the cutting and fitting along with the welding. I will post pics once I get the exhaust cleaned up and installed. I bought it a little dirty.lol as far as Mike at Accufab. Great job, Great price, and a stand up guy to do buissness with. I would definitely recommend Mike for anyone in the Houston area willing to make the short drive to his shop.
Thread Starter
Racer
Joined: Aug 2010
Posts: 280
Likes: 0
From: Tyler Texas
Anyone wanting to contact Mike at Accufab can go to his website at www.accufabtx.com or give him a call at 281-516-3210. He has pictures of TI bypass he has done on his site.