Help! It happened again...
Thread Starter
Intermediate
Joined: Aug 2011
Posts: 25
Likes: 0
From: Huntsville AL
Help! It happened again... Service Column Lock issuses
Im mostly new to posting but been lurking around for many years. 
Well about 2 months ago i had to dreaded "service column lock" and took it to the dealership to get it fixed. I thought they had fixed it. Low and behold it happened again. This time they are saying the motor is burnt up(the column lock motor) and want me to replace it which is going to cost roughly $500. Is there any way i can avoid replacing it? The steering wheel is not locked up but the fuel cut off is. Can i take it to a tuner and just get them to bump it from 2mph to 200mph? (I live about a mile from hinson) What would you do to avoid the $500 bill? If i ordered the bypass module would i still need to replace the motor?
Thanks again, Jadams
Well about 2 months ago i had to dreaded "service column lock" and took it to the dealership to get it fixed. I thought they had fixed it. Low and behold it happened again. This time they are saying the motor is burnt up(the column lock motor) and want me to replace it which is going to cost roughly $500. Is there any way i can avoid replacing it? The steering wheel is not locked up but the fuel cut off is. Can i take it to a tuner and just get them to bump it from 2mph to 200mph? (I live about a mile from hinson) What would you do to avoid the $500 bill? If i ordered the bypass module would i still need to replace the motor?
Thanks again, Jadams
Last edited by JAdams 89; Sep 23, 2011 at 08:03 PM.
Thread Starter
Intermediate
Joined: Aug 2011
Posts: 25
Likes: 0
From: Huntsville AL
I had a bad motor as well. I cut my lock off. Started with a sawzall finished with a hacksaw. No more problems.
More specific? Just took it out of the dash and sawed that little pin off and now all is well?
More specific? Just took it out of the dash and sawed that little pin off and now all is well?
Advanced
Joined: Sep 2011
Posts: 79
Likes: 0
From: FL
can u please pm me this same info. for preventative measures. I was thinking of cutting the pin off also, to help prevent this column lock problem. But won't the fuel still cut off? TIA, Shawn
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski