Converter Question
Thread Starter
Burning Brakes
Joined: Nov 2010
Posts: 1,112
Likes: 62
From: Chicago IL
Converter Question
Just looking for some suggestions. This may be a common issue so here it is.. I've got a 99 vert with H/C/I , full exhaust, CAI, 60lb injectors, M/T Drag Radial, 3.42 diff and a 3400 rpm vig converter. Plus all the supporting mods. Car made 420 rwhp...
Here's the issue.. I can only get about 2400-2500rpms out of the converter before the car starts to roll. The car 60 foots a mid 1.6x every time but I'd really like to leave harder to get the motor in the power band a lot sooner and obviously turn a better 60ft & E.T. I REALLY don't want to take the trans out again to send the converter out to be adjusted. I thought about maybe a brake upgrade...... pads, rotors all around.. Sticker tire... Any suggestions would be great..
Plan "B" is a 150 shot of the sauce to get it done...
Here's the issue.. I can only get about 2400-2500rpms out of the converter before the car starts to roll. The car 60 foots a mid 1.6x every time but I'd really like to leave harder to get the motor in the power band a lot sooner and obviously turn a better 60ft & E.T. I REALLY don't want to take the trans out again to send the converter out to be adjusted. I thought about maybe a brake upgrade...... pads, rotors all around.. Sticker tire... Any suggestions would be great..
Plan "B" is a 150 shot of the sauce to get it done...
Le Mans Master
Joined: Mar 1999
Posts: 6,029
Likes: 85
From: Palm Coast, FL
Just looking for some suggestions. This may be a common issue so here it is.. I've got a 99 vert with H/C/I , full exhaust, CAI, 60lb injectors, M/T Drag Radial, 3.42 diff and a 3400 rpm vig converter. Plus all the supporting mods. Car made 420 rwhp...
Here's the issue.. I can only get about 2400-2500rpms out of the converter before the car starts to roll. The car 60 foots a mid 1.6x every time but I'd really like to leave harder to get the motor in the power band a lot sooner and obviously turn a better 60ft & E.T. I REALLY don't want to take the trans out again to send the converter out to be adjusted. I thought about maybe a brake upgrade...... pads, rotors all around.. Sticker tire... Any suggestions would be great..
Plan "B" is a 150 shot of the sauce to get it done...
Here's the issue.. I can only get about 2400-2500rpms out of the converter before the car starts to roll. The car 60 foots a mid 1.6x every time but I'd really like to leave harder to get the motor in the power band a lot sooner and obviously turn a better 60ft & E.T. I REALLY don't want to take the trans out again to send the converter out to be adjusted. I thought about maybe a brake upgrade...... pads, rotors all around.. Sticker tire... Any suggestions would be great..
Plan "B" is a 150 shot of the sauce to get it done...
go with 373's . . .
Going higher on the rpms on the convertor doesn't always make for a better 60', in theory, yes it does. I have found a sweet spot in the 2100 - 2200 range. I can bring mine up to about 2800 before pushing the front runners but at that range, it didn't net a better 60'. Besides, it's hard holding that kind of rpms on a footbrake and a pro-tree.
Thread Starter
Burning Brakes
Joined: Nov 2010
Posts: 1,112
Likes: 62
From: Chicago IL
go with 373's . . .
Going higher on the rpms on the convertor doesn't always make for a better 60', in theory, yes it does. I have found a sweet spot in the 2100 - 2200 range. I can bring mine up to about 2800 before pushing the front runners but at that range, it didn't net a better 60'. Besides, it's hard holding that kind of rpms on a footbrake and a pro-tree.
Going higher on the rpms on the convertor doesn't always make for a better 60', in theory, yes it does. I have found a sweet spot in the 2100 - 2200 range. I can bring mine up to about 2800 before pushing the front runners but at that range, it didn't net a better 60'. Besides, it's hard holding that kind of rpms on a footbrake and a pro-tree.
Geaux Tigers!!!!
Joined: Nov 2007
Posts: 2,732
Likes: 424
From: DeRidder LA
St. Jude Donor '08 thru '26
Most Vigilante convertors likes to be flashed from a dead idle. The 3600 I have in my car has always liked being flashed and have tried moving the stall up but the 60's suffered. With a very mild heads and cam car and a 3.15 gear my 60's are in the mid 1.6 range with a 315/35/18 Toyo Drag Radial.
Thread Starter
Burning Brakes
Joined: Nov 2010
Posts: 1,112
Likes: 62
From: Chicago IL
Most Vigilante convertors likes to be flashed from a dead idle. The 3600 I have in my car has always liked being flashed and have tried moving the stall up but the 60's suffered. With a very mild heads and cam car and a 3.15 gear my 60's are in the mid 1.6 range with a 315/35/18 Toyo Drag Radial.
