wheel speed sensor wiring ?
Thread Starter
Racer
Joined: Feb 2007
Posts: 382
Likes: 5
From: Virginia
wheel speed sensor wiring ?
Since the wheel speed sensors produce an ac voltage (per the link), when one removes the faulty harnesses, does it matter which wire is connected to which?
http://forums.corvetteforum.com/c5-t...post1573340784
I removed my harnesses 6 years ago because a TCS issue that still exists and I am replacing the wheel bearings again (because I RR) and wantred to verify the connections.
From the schematic and information in the link, we can see the white and black wires of the front jumper specifically got to a color, yet the wheel speed sensor wires are both black and neither labeled A or B.
With AC current, it shouldn't matter... but I just wanted to be sure!
Thanks for any insight and happy new year!
I would even take a picture of the speed sensor side of the harness with the insulation pulled back... Thanks
http://forums.corvetteforum.com/c5-t...post1573340784
I removed my harnesses 6 years ago because a TCS issue that still exists and I am replacing the wheel bearings again (because I RR) and wantred to verify the connections.
From the schematic and information in the link, we can see the white and black wires of the front jumper specifically got to a color, yet the wheel speed sensor wires are both black and neither labeled A or B.
With AC current, it shouldn't matter... but I just wanted to be sure!
Thanks for any insight and happy new year!
I would even take a picture of the speed sensor side of the harness with the insulation pulled back... Thanks
Thread Starter
Racer
Joined: Feb 2007
Posts: 382
Likes: 5
From: Virginia
I figured it out by looking at the A & B side of the rear harnesses and corresponding wire color. I don't know if it matters because of the AC signal or not but it I have the original configuration now.
Happy New Year!!!!
Looking at that post, Bill has tended to it from 2004 - 2011 and into 2012. He deserves a medal!!!!
Thank you Bill!
Happy New Year!!!!
Looking at that post, Bill has tended to it from 2004 - 2011 and into 2012. He deserves a medal!!!!
Thank you Bill!
