Dash off-Actuators right there!-What tools?
Thread Starter
Advanced
Joined: Feb 2008
Posts: 86
Likes: 0
From: Hilliard Ohio
Dash off-Actuators right there!-What tools?
Dash is off(whew). Actuators are right there! How in hells half acre can you get any tool down there to take off those two bolts to remove the actuators. I thought the hard part was taking the dash off- but getting my stubby fingers in there is something else and oh by the way, what the hell do you do with your head ? 1/4" flex extension ?? size of socket ?? is there a special tool ?? I got this far, can anyone help me?? THANK YOU IN ADVANCE
Drifting
Joined: Jul 2006
Posts: 1,375
Likes: 33
From: Shelby Township MI
This is how I did it.
http://vette.tnreeds.com/actuator/actuator.htm
I think I used a small / stubby nut driver. Pain in th butt.
The main / drive gear in mine was cracked.
http://vette.tnreeds.com/actuator/actuator.htm
I think I used a small / stubby nut driver. Pain in th butt.
The main / drive gear in mine was cracked.
Thread Starter
Advanced
Joined: Feb 2008
Posts: 86
Likes: 0
From: Hilliard Ohio
I'm diving in Monday am-I will let everyone know what happens. What size do you think that bolt is that the actuator is attached with? I like the stubby nut driver suggestion.
Thanks again !
Thanks again !
