2003 Corvette Z06 A&A Install
Thread Starter
Former Vendor
Joined: Feb 2007
Posts: 2,572
Likes: 1
From: Austin Texas
2003 Corvette Z06 A&A Install
RPT in Austin completed another A&A Corvette Supercharger install on an immaculate 2003 Corvette Z06. This was already extremely fast car and with the added midrange and top end from A&A Corvette, it is one of a kind. This Z06 is one of the strongest LS6’s in the country putting down 507 rwhp and 446 ft-lbs with Heads and Cam. After the A&A Supercharger was added, the final results were 690 rwhp and 580 ft-lbs on a mere 7 psi.
Prior Modifications:
England Green Mayhem II Camshaft
Trickflow 215 cc Cylinder Heads
FAST 102 mm Intake Manifold
Kooks 1 ¾” Longtube Headers
Kooks 3” Catted X-Pipe
Halltech Killer Bee II
VMax Ported LS2 TB
RPT Custom Tuning….507 rwhp/446 ft-lbs
After Modifications:
A&A Supercharger with V3-Si Trim (3.8” Pulley)
Racetronix Fuel Pump Harness
60lb Fuel Injectors
RPT Custom Tuning…..690 rwhp/580 ft-lbs
With the addition of 183 rwhp and 134 ft-lbs on a ultra lite Z06, this pulls very hard and will challenge the tires at all times.
VIDEO
Prior Modifications:
England Green Mayhem II Camshaft
Trickflow 215 cc Cylinder Heads
FAST 102 mm Intake Manifold
Kooks 1 ¾” Longtube Headers
Kooks 3” Catted X-Pipe
Halltech Killer Bee II
VMax Ported LS2 TB
RPT Custom Tuning….507 rwhp/446 ft-lbs
After Modifications:
A&A Supercharger with V3-Si Trim (3.8” Pulley)
Racetronix Fuel Pump Harness
60lb Fuel Injectors
RPT Custom Tuning…..690 rwhp/580 ft-lbs
With the addition of 183 rwhp and 134 ft-lbs on a ultra lite Z06, this pulls very hard and will challenge the tires at all times.
VIDEO
