zip tie mod and water question
Drifting
Joined: Nov 2011
Posts: 1,279
Likes: 18
From: Oklahoma
there test is on a much smaller displacement engine and most importantly, no retune or PCM relearn was done. My car didn't feel much better until after a days worth of driving.
Also, its more a matter of increasing air flow through a bigger opening in the breather ;-)
more air in and more air out is never a bad thing for performance :-)
if your budget is only $50 or so, I say Zip Tie Mod away!
Also, its more a matter of increasing air flow through a bigger opening in the breather ;-)
more air in and more air out is never a bad thing for performance :-)
if your budget is only $50 or so, I say Zip Tie Mod away!
IMO those guys are tools. Of course a 200hp car isn't going to gain much from a CAI. Plus anyone who knows anything understands that colder and SMOOTHER air produces more hp. On their last test they use a ribbed hose with big curves. Tests have shown that turbulance is created by bends and ribs in the piping of a CAI. This video was really worthless for us.
Last edited by WannaC5Z; Jan 29, 2013 at 11:48 PM.
Melting Slicks
Joined: Jun 2004
Posts: 2,453
Likes: 81
From: Fishin' Pole FL
