Speed Demon Heads/Cam package installed & dynoed
Thread Starter
Melting Slicks
Joined: Sep 1999
Posts: 3,292
Likes: 0
From: Round Rock, Texas Texas
Speed Demon Heads/Cam package installed & dynoed
All I can say is WOW!
My car pulls unbelievably hard down low and up high.
Now for the numbers: 425.6 RWHP & 389 RWT.
This is without and underdrive pulley.
So with the addition of an underdrive pulley, leaning it out a bit more
(I'm still running fairly rich)
and adding a few more degrees of timing (currently @ 23 degrees)
I'm hoping to eak out another 10 RWHP or so.
I took it to the track on Friday and couldn't hook up on the F-1's. :rolleyes:
My nittos are worn down to the nub, or I would have used them.
Looks like I'll need to get some ET Streets to hook up at the track. :D
My car pulls unbelievably hard down low and up high.
Now for the numbers: 425.6 RWHP & 389 RWT.
This is without and underdrive pulley.
So with the addition of an underdrive pulley, leaning it out a bit more
(I'm still running fairly rich)
and adding a few more degrees of timing (currently @ 23 degrees)
I'm hoping to eak out another 10 RWHP or so.
I took it to the track on Friday and couldn't hook up on the F-1's. :rolleyes:
My nittos are worn down to the nub, or I would have used them.
Looks like I'll need to get some ET Streets to hook up at the track. :D
Safety Car
Joined: Dec 2000
Posts: 3,888
Likes: 0
From: Humble, Tx
Re: Speed Demon Heads/Cam package installed & dynoed (Scott97)
DAYUM Scott!!! :cheers: :cheers: What did the Katech package you had put out??? I'm no expert, but the TQ looks a little low....was this by design????
Melting Slicks
Joined: May 2000
Posts: 2,974
Likes: 5
From: CenTex Texas
Re: Speed Demon Heads/Cam package installed & dynoed (Scott97)
Congrats Scott! :cheers: Looks like you're going to be in the 11's for sure now!:D
Are you running a LS1 heads or LS6? Also, what did you do with your Katech setup, did you sell it?
Are you running a LS1 heads or LS6? Also, what did you do with your Katech setup, did you sell it?
Thread Starter
Melting Slicks
Joined: Sep 1999
Posts: 3,292
Likes: 0
From: Round Rock, Texas Texas
Re: Speed Demon Heads/Cam package installed & dynoed (ambitin)
DAYUM Scott!!! :cheers: :cheers: What did the Katech package you had put out??? I'm no expert, but the TQ looks a little low....was this by design????
The Ka-Tech setup put down 370 RWHP and 359 RWT.
There's still tweaking to be done, so I'm pretty sure the torque will come up a bit.
Congrats Scott! :cheers: Looks like you're going to be in the 11's for sure now!:D
Sounds like a sure bet huh? ;)
Are you running a LS1 heads or LS6? Also, what did you do with your Katech setup, did you sell it?
Its a secret ...:p:...J/K I'm running the 5.3 liter heads.
Sounds like a sure bet huh? ;)
Are you running a LS1 heads or LS6? Also, what did you do with your Katech setup, did you sell it?
Its a secret ...:p:...J/K I'm running the 5.3 liter heads.
Awesome dude...welcome to the club- the club of smiling-ear-to-ear-drivin-fools!!
Enjoy the ride!
Justin
Enjoy the ride!
Justin
Thread Starter
Melting Slicks
Joined: Sep 1999
Posts: 3,292
Likes: 0
From: Round Rock, Texas Texas
Re: Speed Demon Heads/Cam package installed & dynoed (QuickSilver97)
:cool: You'll find it very hard to stay off the throttle even more so now!
Looks like you got some really nice numbers from the S.C. :yesnod:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Melting Slicks
Joined: Sep 1999
Posts: 3,292
Likes: 0
From: Round Rock, Texas Texas
Re: Speed Demon Heads/Cam package installed & dynoed (Hissey)
Great numbers!!! :cheers: Like Justin said "11's are in your near future". Like the next time you hit the track! :D
I'm hoping for mid 11's on some decent tires. :yesnod:
Thread Starter
Melting Slicks
Joined: Sep 1999
Posts: 3,292
Likes: 0
From: Round Rock, Texas Texas
Re: Speed Demon Heads/Cam package installed & dynoed (Tuan Le)
Awesome! :cheers:
Congrats Scott. You will definitely hit 11's.
Thanks Rick, how did you like the test run? ;)
Thanks Rick, how did you like the test run? ;)
:cheers: Awesome #'s :cheers:
I responded to your IM.
Thread Starter
Melting Slicks
Joined: Sep 1999
Posts: 3,292
Likes: 0
From: Round Rock, Texas Texas
Re: Speed Demon Heads/Cam package installed & dynoed (Loco)
Awesome car. What other mods do you have on it? BTW I love the way your engine bay looks :cool:
Nice Scott! I cant wait to see you run at RCR.
I got a cam in now, so I hope I can keep up. :D
I got a cam in now, so I hope I can keep up. :D
That cam and your current mods is gonna be kickin'!
I might be the one tryin' to keep up. ;)
[Modified by Scott97, 12:43 PM 5/19/2002]
Thread Starter
Melting Slicks
Joined: Sep 1999
Posts: 3,292
Likes: 0
From: Round Rock, Texas Texas
Re: Speed Demon Heads/Cam package installed & dynoed (C5Cemo)
Awesome numbers Scott :smash: :smash:
Congrats! :cheers:
Congrats! :cheers:
Now maybe I'll be able to hang with you Houston guys at the track. :)