Convertible lid strut replacements
Thread Starter
Burning Brakes
Joined: May 2003
Posts: 947
Likes: 1
From: Merritt Island, Blonde Surfer Dude! Florida
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '07-'09
Convertible lid strut replacements
I am going to replace the struts on my convertible lid when I get home. Any suggestions on the easiest way or shot cuts? 
Drifting
Joined: Jan 2012
Posts: 1,341
Likes: 8
From: Hopatcong New Jersey
Here ya go:
Document ID# 656600
2002 Chevrolet Corvette
________________________________________
Folding Top Stowage Compartment Lid Struts Replace
Removal Procedure
1. Open the folding top stowage compartment.
2. Remove the forward end of the strut from the hinge ball stud.
3. Close the folding top stowage compartment lid.
4. Open the rear stowage compartment lid.
5. Remove the strut from the rear ball stud.
Installation Procedure
1. Open the rear stowage compartment lid.
2. Position the rod end of the strut through the access hole between the quarter panel and the support.
3. Install the strut to the rear ball stud.
4. Close the rear stowage compartment.
5. Open the folding top stowage compartment.
6. Install the rod end of the strut to the front of the hinge.
7. Close the folding top stowage compartment.
Document ID# 656600
2002 Chevrolet Corvette
________________________________________
Folding Top Stowage Compartment Lid Struts Replace
Removal Procedure
1. Open the folding top stowage compartment.
2. Remove the forward end of the strut from the hinge ball stud.
3. Close the folding top stowage compartment lid.
4. Open the rear stowage compartment lid.
5. Remove the strut from the rear ball stud.
Installation Procedure
1. Open the rear stowage compartment lid.
2. Position the rod end of the strut through the access hole between the quarter panel and the support.
3. Install the strut to the rear ball stud.
4. Close the rear stowage compartment.
5. Open the folding top stowage compartment.
6. Install the rod end of the strut to the front of the hinge.
7. Close the folding top stowage compartment.
Thread Starter
Burning Brakes
Joined: May 2003
Posts: 947
Likes: 1
From: Merritt Island, Blonde Surfer Dude! Florida
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '07-'09
Do they just pry off or is there a pin or bracket that needs to be removed?
Burning Brakes
Joined: Mar 2010
Posts: 1,186
Likes: 1
From: North Topsail Beach NC
Search is your friend:
http://forums.corvetteforum.com/c5-g...tallation.html
I recently replaced mine using the method described in the link.
Got the new ones on ebay for $28 including shipping.
http://forums.corvetteforum.com/c5-g...tallation.html
I recently replaced mine using the method described in the link.
Got the new ones on ebay for $28 including shipping.
Pro
Joined: Mar 2006
Posts: 700
Likes: 2
From: Spring Hill Florida
When I got on the "fleabay" site I got confused but as soon as I saw the "click on Chevrolet" and then put in Corvette in the "search" bar; all was clear. My bad. Thanks for the help, ordered and on the way. Hope the installation is as easy as the ordering!
Melting Slicks
Joined: Jun 2004
Posts: 2,453
Likes: 81
From: Fishin' Pole FL
