HUD wiring harness... HELP
Thread Starter
Burning Brakes
Joined: Sep 2001
Posts: 1,173
Likes: 1
From: Aguila AZ
HUD wiring harness... HELP
I have everything for a HUD install on my '98 except the 11 wire harness... Anyone out there have the connectors to make this harness? Anyone want to make one for me?
I have the info from Black Knight, but my wire colors are different than his and without a schematic I can't do the harness myself...
Best of all is if someone had one they would sell me... Fat chance, right!
Thanks
Shirl
I have the info from Black Knight, but my wire colors are different than his and without a schematic I can't do the harness myself...
Best of all is if someone had one they would sell me... Fat chance, right!
Thanks
Shirl
Drifting
Joined: Dec 2000
Posts: 1,516
Likes: 0
From: Shelton CT
Cruise-In II Veteran
Re: HUD wiring harness... HELP (MrEracer)
Hi there,
These are Metripak 461 connectors.
Your best bet would be to contact some Corvette salvage yards, to attain the connectors.
Making the harness is very difficult as there are very small connectors, 22 gauge. Terminals are available.
And from my research, you still cannot get the plastic connectors to plug in.
Sorry about it, c4c5 :chevy
These are Metripak 461 connectors.
Your best bet would be to contact some Corvette salvage yards, to attain the connectors.
Making the harness is very difficult as there are very small connectors, 22 gauge. Terminals are available.
And from my research, you still cannot get the plastic connectors to plug in.
Sorry about it, c4c5 :chevy
