Why am i getting a vibration at 2000rpms??
Thread Starter
Pro
Joined: Jan 2005
Posts: 670
Likes: 1
From: Vancouver BC
Why am i getting a vibration at 2000rpms??
I just installed the Pfadt C5 Transmission Brace on my 98 6 speed. Now i am getting a vibration from my drive-train when i raise my rpm up to 2000. It seems like it gets worse as i raise my rpm higher.. What is my problem?? What do i have to do to fix this problem.
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Two things to check:
1. Did you properly torque the four rods? Try backing off on the rod torque and see if it goes away
2. See if the brace is contacting anything near it.
Does it vibrate with the clutch out and the trans in neutral as you rev the engine?? If so, you could have torque tube rubber coupler issues.
Bill
1. Did you properly torque the four rods? Try backing off on the rod torque and see if it goes away
2. See if the brace is contacting anything near it.
Does it vibrate with the clutch out and the trans in neutral as you rev the engine?? If so, you could have torque tube rubber coupler issues.
Bill
