Fuse schedule lay out wanted
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
For whats its worth, I do not believe MAGNASTEER has its own fuse. Its a function of the EBTCM and the curcuit goes straight to the steering rack
BC
BC
Thread Starter
Burning Brakes
Joined: Sep 2011
Posts: 1,008
Likes: 1
From: Grove city Ohio
Thx Bill. We talked last year about my steering being hard at low speeds. I do have the magnasteer and other codes. I am just now trying to fix it. I was looking for a short or a loose wire ect. As the code occurred after I jacked the vehichle up , back and front. Then installed a skip shifter. Any advise would be welcome.
Race Director
Joined: Apr 2007
Posts: 11,152
Likes: 890
From: South Western Ontario
I agree with Bill. The Magnasteer is controlled by 2 wires coming right from the EBTCM so check the 2 wires and the connectors for damage. There may be a ground involved just for it but I'd have to look at the schematics tonight.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski