Brake hoses
Burning Brakes
Joined: Dec 2003
Posts: 1,243
Likes: 5
From: Loveland CO
X2, change hoses on all 4 corners 1st obviously then Bleed from the furthest coner from the master cyl to the closest.. so yes.. if you have a clear bleeder hose make sure you get any old/dirty fluid out untill its clean.. make sure to watch the res to make sure it stays full. I would recommend a Good Synth brake fluid (dot3 or Dot 4), i did valvoline in mine but everyone here likes Amsoil.
1: Right rear
2: Left rear
3: Right front
4: Left front
1: Right rear
2: Left rear
3: Right front
4: Left front
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
X2, change hoses on all 4 corners 1st obviously then Bleed from the furthest coner from the master cyl to the closest.. so yes.. if you have a clear bleeder hose make sure you get any old/dirty fluid out untill its clean.. make sure to watch the res to make sure it stays full. I would recommend a Good Synth brake fluid (dot3 or Dot 4), i did valvoline in mine but everyone here likes Amsoil.
1: Right rear
2: Left rear
3: Right front
4: Left front
1: Right rear
2: Left rear
3: Right front
4: Left front
Last edited by Patches; Sep 28, 2013 at 08:56 PM.
