Headlight low beam plug melted
Thread Starter
Cruising
Joined: Nov 2013
Posts: 10
Likes: 0
Headlight low beam plug melted
I need some help trying to find a low exam headlights plug... Looks like it melted. Where can I find a replacement to solder one in? I don't want to buy a whole new harness for one plug
Car is a 2001 Convertible... Please help guys
Car is a 2001 Convertible... Please help guys
Last edited by Hotdawwgman; Nov 11, 2013 at 03:34 AM.
Drifting
Joined: Feb 2003
Posts: 1,761
Likes: 235
From: North Carolina
They are available at almost all auto parts stores, Advance, Autozone, NAPA, etc. for a few dollars.
example:
http://shop.advanceautoparts.com/web...cket+connector
There is also a (heavy duty) high temp version if your interested
Properly splice it in and your back on the road.
example:
http://shop.advanceautoparts.com/web...cket+connector
There is also a (heavy duty) high temp version if your interested
Properly splice it in and your back on the road.
Last edited by MAC5; Nov 11, 2013 at 09:55 AM.
Drifting
Joined: Feb 2003
Posts: 1,761
Likes: 235
From: North Carolina
Concur with above and Chris308's comment on loose connection. Over the years I've had to replace one connector in both my 2001 & 2005 Jeep Grand Cherokees. Only thing in common was both were on the low beam and I was running Wagner Truview headlight bulbs (correct wattage). Up until I installed Radioflyers ACA HID setup last month, ran the Wagner's in the 98 C5 for years without any problems.
