Tman2
#1
Intermediate
Thread Starter
Member Since: Aug 2014
Location: Illinois
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Tman2
Have a 1997 vette, abs and traction control lights stay on most of the time other than a few times they blink on and off. Can this problem be fixed ? Please help
#2
Intermediate
Thread Starter
Member Since: Aug 2014
Location: Illinois
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Hey 8 vette 7, here's the codes I came up with: u1040hc andp1571hc. Thx for responding!
http://www.c5forum.com/ayc/dtcdic.php
OR
[/QUOTE]
http://www.c5forum.com/ayc/dtcdic.php
OR
[/QUOTE]
#7
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,182 Likes
on
1,585 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08
If you have traction control lights and messages,,,,, you probably have more code than that.
Turn the ignition on, CLEAR ALL THE DTCs
Take the car for a drive and before you turn the IGNITION OFF,,, Clear any messages with the RESET button on the IPC Buttons and then read the DTCs (WITH OUT TURNING OFF THE IGNITION!)
Post those DTCs
Turn the ignition on, CLEAR ALL THE DTCs
Take the car for a drive and before you turn the IGNITION OFF,,, Clear any messages with the RESET button on the IPC Buttons and then read the DTCs (WITH OUT TURNING OFF THE IGNITION!)
Post those DTCs
#9
Intermediate
Thread Starter
Member Since: Aug 2014
Location: Illinois
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Abs brake module problem?
Hey Bill, did what you asked and came up with the same codes. P1571hc under 10-PCM sensor and U1040hc under 60-Ipc sensor, hope this helps!