Two problems on the Z06 that need to be fixed
Thread Starter
Racer
Joined: Feb 2014
Posts: 298
Likes: 0
From: Detroit Michigan
Two problems on the Z06 that need to be fixed
First : NO power steering after removing the engine and reinstalling the engine..
Removed the entire pump assy / hard lines and re assembled a few months later.
I have bled the system twice and after removing all the air (so I thought) I still have no power steering.
No leaks, but I'm not sure if I routed the lines correctly or not.;
Power steering pump shows no signs of not working/ spinning. No noises etc.
ABS light..
Was turning the steering wheel to align the steering rack to the column and I think I spun the wheel too far one direction and potentially snapped a sensor in the steering wheel.. Possible?
How hard to dive into that and replace?
Removed the entire pump assy / hard lines and re assembled a few months later.
I have bled the system twice and after removing all the air (so I thought) I still have no power steering.
No leaks, but I'm not sure if I routed the lines correctly or not.;
Power steering pump shows no signs of not working/ spinning. No noises etc.
ABS light..
Was turning the steering wheel to align the steering rack to the column and I think I spun the wheel too far one direction and potentially snapped a sensor in the steering wheel.. Possible?
How hard to dive into that and replace?
