Heat/Air Display 98
Thread Starter
Instructor
Joined: May 2013
Posts: 115
Likes: 3
From: Greensboro NC
Heat/Air Display 98
I have a 98 with the dual heat/air. The display does not display but everything seems to work properly. It this a bad bulb, if so how do I get to it to replace it, or, is the display bad and where can I find a replacement?
Drifting
Joined: Feb 2008
Posts: 1,596
Likes: 67
From: Bahama North Carolina
Very common problem and the fix has been posted numerous times. You do not need a new hvac controller. Do it yourself or check e-bay.
https://www.corvetteforum.com/forums...splay-fix.html
https://www.corvetteforum.com/forums...splay-fix.html
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
To SUM IT UP,,,, The surface mount resistors on the circuit board break loose from the circuit board and need to be resoldered. Simple as that..
If you cant or don't want to solder,, either take it to a TV Repair shop or find someone on the forum who repairs them. I did my own and it took 30 min.
Bill
If you cant or don't want to solder,, either take it to a TV Repair shop or find someone on the forum who repairs them. I did my own and it took 30 min.
Bill
