Paging C5 tech Pcm question
Thread Starter
Race Director
Joined: Mar 2001
Posts: 10,030
Likes: 10
From: Prescott AZ
St. Jude Donor '04
Paging C5 tech Pcm question
Can you use a 02 Z06 Pcm with it's current programing on a 97 C5. I would like to elimate the F45 and the tire sensors. I do have some mod's and realize I would have to adjust the spedo with C5 edit because of the different tranny. Thanks in advance
Drifting
Joined: Feb 2000
Posts: 1,922
Likes: 0
From: Boulder, Colorado
Re: Paging C5 tech Pcm question (Wicked C5)
Can you use a 02 Z06 Pcm with it's current programing on a 97 C5. I would like to elimate the F45 and the tire sensors. I do have some mod's and realize I would have to adjust the spedo with C5 edit because of the different tranny. Thanks in advance
If your dealership is friendly, they might do the tech-II for free, mine did. It only takes 5 minutes if they know what they are doing. The most I can imagine them charging is an hour of labor, which will still be under $100.
You might to find out if LS1Edit can delete F45 and the tire sensors, since with your mods you could probably benefit from dyno tuning, and then you could get them taken care of together.
Good luck,
:cheers:
[Modified by Miles in Michigan, 10:43 PM 9/5/2002]
