Charging issue, need some help!
Thread Starter
Le Mans Master
Joined: Dec 2013
Posts: 6,337
Likes: 5,109
From: Charles Town WV
2024 Corvette of the Year Finalist - Modified
2023 C6 of the Year Winner - Modified
2022 C6 of the Year Finalist - Modified
Charging issue, need some help!
Need some help guys, I have a 98 Corvette that we recently added a Vortech V3 and a 2002 PCM too (did the repin). Its been a bit of a rocky road but we've lined all but one issue out. For some reason I cant get it to charge. So basically what I have so far... I've eliminated the possiblitys of the alternator being bad (we tested it with another known working unit and produced the same results) and as best i can tell all the wiring near the starter appears to be tight and copacetic. When i test my voltages at the 3 pin with key on I'm showing 12v at the small red wire, and the large red wire. I show nothing at the grey. Same goes when i check them at the PCM. (double checked my pinouts and all that appears to be right). We checked every fuse in the car last night and all was well. Just not quite sure where to go next or even what that Grey wire should be showing. If anyone can point me in the right direction I'd greatly appreciate it. I have a well seasoned GM tech helping me and its even got him scratching his head
