Possible to log oil temp and pressure via OBDII port?
#1
Burning Brakes
Thread Starter
Possible to log oil temp and pressure via OBDII port?
I have an '02 Z06. Is it possible to log oil temp and oil pressure via OBDII port with the android/apple Torque App?
I can't seem to get a reading for Oil Temp or Oil Pressure. I get the coolant temp, trans temp, rpm, etc. just fine. Also the oil temp and pressure I can log fine on my C6 and other cars.
Any ideas? Or is the C5 just too old and doesn't have that capability via the ODBII port?
Thanks for the help.
I can't seem to get a reading for Oil Temp or Oil Pressure. I get the coolant temp, trans temp, rpm, etc. just fine. Also the oil temp and pressure I can log fine on my C6 and other cars.
Any ideas? Or is the C5 just too old and doesn't have that capability via the ODBII port?
Thanks for the help.
#2
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,180 Likes
on
1,583 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08
ALL LS Sensor data is able to be logged via serial data line.
You just need to put the correct PID in your scanner to view it.
My cheep O ACTRON Scanner can see any pid I put in it.
Bill
You just need to put the correct PID in your scanner to view it.
My cheep O ACTRON Scanner can see any pid I put in it.
Bill
#4
Tech Contributor
Member Since: Dec 1999
Location: Anthony TX
Posts: 32,736
Received 2,180 Likes
on
1,583 Posts
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Each scanner has a master list of PIDs. Most are self explainatory. Look in the owners/operators manual for your Android/Apple Torque App and it should show you how to put the PIDs where they need to be to display that data.
Bill
Bill
#5
Burning Brakes
Thread Starter
Yes the Torque App allows you to input custom PID's to monitor however you must know what the PID value is in order to do that.
Anyone happen to know what the PID value is for oil temp and oil pressure?
Anyone happen to know what the PID value is for oil temp and oil pressure?
#9
Racer
Dated a bit, but interesting read.
http://obdcon.sourceforge.net/2010/06/obd-ii-pids/
This might help some:
http://forum.gps-laptimer.de/viewtopic.php?t=2292
http://obdcon.sourceforge.net/2010/06/obd-ii-pids/
This might help some:
http://forum.gps-laptimer.de/viewtopic.php?t=2292
#12
Burning Brakes
Thread Starter
Dated a bit, but interesting read.
http://obdcon.sourceforge.net/2010/06/obd-ii-pids/
This might help some:
http://forum.gps-laptimer.de/viewtopic.php?t=2292
http://obdcon.sourceforge.net/2010/06/obd-ii-pids/
This might help some:
http://forum.gps-laptimer.de/viewtopic.php?t=2292
Last edited by dapopa9; 10-16-2017 at 07:49 PM.
#13
Burning Brakes
Thread Starter
Any idea how 'EOPS' would translate to the HEX value?
here is a video that shows the fields to complete in the Torque App: