C1296 Code- Brake Master Cylinder Pressure Sensor Circuit
Thread Starter
Burning Brakes
Joined: Feb 2013
Posts: 844
Likes: 55
C1296 Code- Brake Master Cylinder Pressure Sensor Circuit
I keep getting the C1296 Code (28-TCS)- Brake Master Cylinder Pressure Sensor Circuit.
This is a 2002 Z06.
I read on another post that this could be corrected with GM Part# 10417400. This piece screws into the EBCM module area.
However I bought that 10417400 and it doesn't fit. The connector on it is slightly different then the one on my car.
Anyone know what the correct part# would be?
This is a 2002 Z06.
I read on another post that this could be corrected with GM Part# 10417400. This piece screws into the EBCM module area.
However I bought that 10417400 and it doesn't fit. The connector on it is slightly different then the one on my car.
Anyone know what the correct part# would be?
Advanced
Joined: Jul 2018
Posts: 51
Likes: 1
Did you find the correct part number?
I keep getting the C1296 Code (28-TCS)- Brake Master Cylinder Pressure Sensor Circuit.
This is a 2002 Z06.
I read on another post that this could be corrected with GM Part# 10417400. This piece screws into the EBCM module area.
However I bought that 10417400 and it doesn't fit. The connector on it is slightly different then the one on my car.
Anyone know what the correct part# would be?
This is a 2002 Z06.
I read on another post that this could be corrected with GM Part# 10417400. This piece screws into the EBCM module area.
However I bought that 10417400 and it doesn't fit. The connector on it is slightly different then the one on my car.
Anyone know what the correct part# would be?
Thanks,
Jim
Thread Starter
Burning Brakes
Joined: Feb 2013
Posts: 844
Likes: 55
That was the correct part however at some point in time GM changed the connector on the part. So I actually had to cut off that original connector on the car side, and purchase and attach the updated connector that fit the new pressure sensor.
1st Gear
Joined: May 2023
Posts: 1
Likes: 0
Connector part number
I know this is a super old thread, but can you please tell me what part number you bought to get a plug for the updated pressure switch? I’m having the exact issue on my 2002. Bought new part, connector is different. Thanks!
Advanced
Joined: Apr 2013
Posts: 67
Likes: 1
From: San Diego CA
c5kyle, have similar issue. It appears to be very difficult to locate GM part#
Did you solve your issue? Did you find a replacement part?
Thanks,
Kevin
10417400 Brake Pressure Modulator Valve Pressure Sensor
Did you solve your issue? Did you find a replacement part?
Thanks,
Kevin
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo