When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So when I turn my headlights off, my driver side headlight won't go completely flush. It actually closes all the way likes its suppose to, then barely pops up and stays there.
When it does do this, I can make it close back to normal by quickly switching the headlights to on/off.
Anybody know what could be causing this? Thanks in advance!
For some reason I couldn't find the bump stops that are shown in the top picture. I'll look again and see if they are missing.
However I did see those bump stops that are shown on the bottom pic and they are all there.
Well I finally got my lazy butt out in the garage and checked out that bump stop. It is the exact same one that is on the second picture that’s missing. I will find a new one and put it in so hopefully that fixes the problem! Thanks again guys
Well I finally got my lazy butt out in the garage and checked out that bump stop. It is the exact same one that is on the second picture that’s missing. I will find a new one and put it in so hopefully that fixes the problem! Thanks again guys
rodneydickman.com sells them....take a look. They are called "insulator bump stops" and sell for $2.75 each
Last edited by runner140*; Dec 29, 2017 at 03:30 PM.
Reason: add
Well I finally got my lazy butt out in the garage and checked out that bump stop. It is the exact same one that is on the second picture that’s missing. I will find a new one and put it in so hopefully that fixes the problem! Thanks again guys
Headlight won't flip down all the way
