Ball joints
Thread Starter
Burning Brakes
Joined: Nov 2006
Posts: 768
Likes: 25
From: Cape Cod
Ball joints
Hey guys,I am re-doing all the bushings on my c5 and while I have it torn apart I'm going to go ahead and do all the ball joints,my question is,moog or proforged have part numbers for the front upper and lower but nothing for rear upper or lower,I am assuming that they are the same as the front uppers and lower,they sure do look it,I've measured then put them side by side, I would sure like to hear back from a
suspension pro, please chime in, thanks in advance
suspension pro, please chime in, thanks in advance
Last edited by leo12; Jan 24, 2018 at 06:41 PM. Reason: Spell
Acct Suspended APR 2026 by request
Joined: Dec 2010
Posts: 10,367
Likes: 1,272
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
all the uppers are the same and all the lowers are the same... the spindles are also the same on LF/RR and RF/LR, basically they are just flipped around and used on the other side of the car
Thread Starter
Burning Brakes
Joined: Nov 2006
Posts: 768
Likes: 25
From: Cape Cod
