Hud
Thread Starter
8th Gear
Joined: Apr 2018
Posts: 8
Likes: 0
From: Benton AR
Hud
Anybody ever replaced the HUD bezel? Just bought my car and its broken. Got the new one today but I don’t want to start pulling on it if it has screws coming in from the bottom. Thanks in advance.
Melting Slicks
Joined: Jul 2004
Posts: 3,294
Likes: 482
From: Brea CA
The whole dash pad has to come out. The bezel is held in with kind of a spring clip that pushes over the post that goes through the dash pad.
There are a couple of hidden screws in the dash top under the a pillar trim and defroster vent. The center console, radio surround, knee bolster, glove box has to come out as well. There are some disassembly instructions on the forum and YouTube for reference.
Gary
There are a couple of hidden screws in the dash top under the a pillar trim and defroster vent. The center console, radio surround, knee bolster, glove box has to come out as well. There are some disassembly instructions on the forum and YouTube for reference.
Gary
Le Mans Master
Joined: Mar 2004
Posts: 8,700
Likes: 298
From: Ft. Lauderdale Fl
The whole dash pad has to come out. The bezel is held in with kind of a spring clip that pushes over the post that goes through the dash pad.
There are a couple of hidden screws in the dash top under the a pillar trim and defroster vent. The center console, radio surround, knee bolster, glove box has to come out as well. There are some disassembly instructions on the forum and YouTube for reference.
Gary
There are a couple of hidden screws in the dash top under the a pillar trim and defroster vent. The center console, radio surround, knee bolster, glove box has to come out as well. There are some disassembly instructions on the forum and YouTube for reference.
Gary
https://video.search.yahoo.com/yhs/s...7c&action=view
Real time is just over five minutes.
Last edited by runner140*; Apr 17, 2018 at 07:22 AM. Reason: add
Instructor
Joined: May 2011
Posts: 215
Likes: 134
From: Hydro, Oklahoma
I did this last week and the only tool I used was a 1 inch putty knife to carefully pry the old one up. 5 minutes is about right. Nothing has to come out except the bezel.
Last edited by DirtRoad; Apr 17, 2018 at 08:20 AM.
Le Mans Master
Joined: Mar 2004
Posts: 8,700
Likes: 298
From: Ft. Lauderdale Fl
Melting Slicks
Joined: Jul 2004
Posts: 3,294
Likes: 482
From: Brea CA
Take a look at this:
https://video.search.yahoo.com/yhs/s...7c&action=view
Real time is just over five minutes.
https://video.search.yahoo.com/yhs/s...7c&action=view
Real time is just over five minutes.
Gary
Le Mans Master
Joined: Mar 2004
Posts: 8,700
Likes: 298
From: Ft. Lauderdale Fl
I have no reason to doubt him.
