Won’t display tire learning
Thread Starter
Intermediate
Joined: Apr 2014
Posts: 38
Likes: 0
Won’t display tire learning
new sensors on the rear with new tires. All sensors were working before installing the new OEM sensors on the rear. When I go thru dic after the tire trading comes up it just beeps and tire learning isn’t displayed. Try it anyway but no horn verbs. Magnet isn’t a gm tool, seems very strong, came from the bottom of tool dish that you put bolts in working on your car. 2001 C5. Charge the battery and it shows 12.44 volts on my dm.
Administrator
Joined: Mar 2001
Posts: 368,324
Likes: 24,777
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Moved to C5 Tech.
Thread Starter
Intermediate
Joined: Apr 2014
Posts: 38
Likes: 0
Just ran through the sequence again, when you push the option button it brings up tire training, then push the reset, it stays in tire training. There is a beep, tired the magnet on different tires each time without any responses form the horn. The gauges are blank for tire pressure
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Oct 2016
Posts: 842
Likes: 195
From: Binghamton, NY
Have you tried your old sensors? I dont remember offhand, but there are a few tricks you can use to test them without mounting. The Search function should provide the info you need.
What mhz are the replacements?
What mhz are the replacements?
Drifting
Joined: Mar 2017
Posts: 1,486
Likes: 343
From: Long Island New York
It has to happen exactly like that video I posted, you need to get to the point it is looking for the LF tire.
If it is not getting to that point, you might want to disconnect the battery for for 15 minutes, relearn the fob, then go to tire training again and see if it works.
If it is not getting to that point, you might want to disconnect the battery for for 15 minutes, relearn the fob, then go to tire training again and see if it works.
Drifting
Joined: Mar 2017
Posts: 1,486
Likes: 343
From: Long Island New York
Try standing in front of the car with the engine off and holding down the lock and unlock buttons down for 10 seconds. The car should recognize and store the fob freq.
Last edited by pjdbm; Aug 11, 2018 at 07:00 PM.
Thread Starter
Intermediate
Joined: Apr 2014
Posts: 38
Likes: 0
Will pull codes, battery was new in nov/17 but it was allowed Togo real dead. I am going to by a new battery after I pull the codes. Voltage is likely the problem or a connection. Thanks for all the good advice. After a overnight charge only shows 12.45 on digital multimeter