Lingingfelter TRG-002 conversion box
Thread Starter
Advanced
Joined: Jan 2007
Posts: 81
Likes: 3
From: Rocky Hill CT
Lingingfelter TRG-002 conversion box
Just curious if anyone has had any issues with the Lingingfelter conversion box. I'm installing an LS3 into my 98 C5, and when it came time to plug in their "Crank out" into what I thought was my crank wire, it would not plug in. The "Cam out" wire plugged in fine. The same thing happened when I attempted to plug into what I thought was my cam wire, only to find that the "Crank out" wire plugged in there. After installing the engine and neatly placing all the wires (wire looms, hold down clamps, etc.), it continued to bother me so, I researched the colors of the two sensors. It appears that the plugs must have ben crossed by Lingingfelter during production but, that seems unlikely so, I am unsure what to do, and I am dreading the thought of ripping everything out all over again after I took the time to install everything so neatly.
