Axle Ratios
Racer
Joined: Mar 2002
Posts: 365
Likes: 0
From: Petaluma CA
Re: Axle Ratios (Toecutter)
Assuming it's stock:
Look inside your glovebox at the list of codes. If you see G90 then you have 2.73; if you see G92 then you have the 3.15.
If you can't find the code then put the car in 3rd gear on the highway at 75 mph. Take the tach reading and divide by 1000:
3150 rpm = 3.15
2730 rpm = 2.73
Crash...
And let me be the first to welcome you the the Forum. You'll love it here, but be forewarned: mod fever is rampant around here and it's highly contagious. :cheers:
[Modified by Crash99, 7:49 PM 11/3/2002]
Look inside your glovebox at the list of codes. If you see G90 then you have 2.73; if you see G92 then you have the 3.15.
If you can't find the code then put the car in 3rd gear on the highway at 75 mph. Take the tach reading and divide by 1000:
3150 rpm = 3.15
2730 rpm = 2.73
Crash...
And let me be the first to welcome you the the Forum. You'll love it here, but be forewarned: mod fever is rampant around here and it's highly contagious. :cheers:
[Modified by Crash99, 7:49 PM 11/3/2002]
Thread Starter
Intermediate
Joined: Nov 2002
Posts: 46
Likes: 0
From: Plano Tx
Re: Axle Ratios (Crash99)
Thanks for the reply and welcome!
I think Ill try the highway method first, its more fun while the car is still new to me.
As far as modding Ill leave that for the TA, Ok maybe a nitrous kit!
I think Ill try the highway method first, its more fun while the car is still new to me.
As far as modding Ill leave that for the TA, Ok maybe a nitrous kit!
Team Owner
Joined: Apr 2001
Posts: 54,204
Likes: 180
From: S.W. Ohio. . . . . . NRA Life Member
Re: Axle Ratios (Toecutter)
