Plug wires touching FLP headers?
Safety Car
Joined: Aug 2000
Posts: 4,154
Likes: 1
From: Murphy TX
Cruise-In II Veteran
Re: Plug wires touching FLP headers? (rwj383)
Lots of TTS users are running around w/o support at the bell housing, no problem. If it were me I would probably lop off the tabs and have one less issue to deal with.
Melting Slicks
Joined: Oct 2002
Posts: 2,200
Likes: 0
Re: Plug wires touching FLP headers? (ToplessTexan)
Hmmmm... :confused:
Could you not use a metal lined rubber grommet between the tabs and where they bolt in. It would isolate vibration damage and give you some room to "fudge" the exact alignment??? :confused:
I really want a set of these..... :D
:cheers:
[Modified by SideStep, 5:16 PM 12/9/2002]
Could you not use a metal lined rubber grommet between the tabs and where they bolt in. It would isolate vibration damage and give you some room to "fudge" the exact alignment??? :confused:
I really want a set of these..... :D
:cheers:
[Modified by SideStep, 5:16 PM 12/9/2002]
Racer
Joined: Sep 1999
Posts: 278
Likes: 0
From: texarkana ar
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In IV Veteran
Re: Plug wires touching FLP headers? (Rapid Transit)
Are there any other Headers out there that dosen't have these problems with the C5? I"m going to get a set. I think I want stainless but not sure what brand. I want them them to go all the way back to the Corsa flanges. I want them to be a one time deal and last. :flag
Racer
Joined: Mar 2002
Posts: 397
Likes: 2
From: Marstons Mills MA
Re: Plug wires touching FLP headers? (rwj383)
RWJ383 - I'm reading your comments with much concern! I'm in the middle of the FLP install and everything is lining up! I feel like I hit the GD lottery! So my front brackets line up perfectly... you wouldn't use them?
How many miles since your install w/o bolting down the tabs? No problems? :confused:
How many miles since your install w/o bolting down the tabs? No problems? :confused:
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
Re: Plug wires touching FLP headers? (CapeCodCoupe)
Remember that FLP did a redesign based on the fitment issues. You apparently got the new version. Install them as FLP instructs. :yesnod:
Safety Car
Joined: Aug 2000
Posts: 4,154
Likes: 1
From: Murphy TX
Cruise-In II Veteran
Re: Plug wires touching FLP headers? (SideStep)
Hmmmm... :confused:
Could you not use a metal lined rubber grommet between the tabs and where they bolt in. It would isolate vibration damage and give you some room to "fudge" the exact alignment??? :confused:
Could you not use a metal lined rubber grommet between the tabs and where they bolt in. It would isolate vibration damage and give you some room to "fudge" the exact alignment??? :confused:
Thread Starter
Le Mans Master
Joined: Nov 2001
Posts: 6,905
Likes: 205
From: Kern County CA
Re: Plug wires touching FLP headers? (ToplessTexan)
CapeCodCoupe: All the stars must be aligned for your install! :cheers: You're very fortunate to get the FLPs with the front hanger tabs lined up.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
Re: Plug wires touching FLP headers? (Rapid Transit)
You can twist the stock plug wire at the coil to help "pull" the wire as far as possibly from the header.
I left the stock wires and Heat shields on..........2 weeks later of EDD, all is well.
I just checked the header bolts last night, nice and tight :yesnod:
I left the stock wires and Heat shields on..........2 weeks later of EDD, all is well.
I just checked the header bolts last night, nice and tight :yesnod:
Pro
Joined: Sep 2000
Posts: 736
Likes: 0
From: Breese Illinois
Re: Plug wires touching FLP headers? (ALLTHROTTLE&NOBOTTLE)
Hi guys,
Here's what I'm installing with my FLP's. They should arrive this week and I'll compare them to the TAYLOR wire protectors that I bought first. But since the TAYLORs were >$56, they may go back, I'll let you know.
LS-1 KoolSox-3/4"x 8" (Gen-3).......07501 $37.35 (pkg of 8)
The sock provides an easily visible way to detect potential burn areas before they occur. The sock absorbs the burn instead of the wire so no misfire occurs. An adjustable ring allows the unique sock to be rotated enhancing it's longer life. Soft, very flexible, easy to handle and install. Adapts and stretches over irregular surfaces.
http://www.koolmat.com/wire.shtml
P.A. Grinnell Co.
P.O. Box 985
Mooresville, NC 28115
Fax: 704.662.9109
Phone: 704.662.9099
Toll Free: 877.566.5369
later,
Here's what I'm installing with my FLP's. They should arrive this week and I'll compare them to the TAYLOR wire protectors that I bought first. But since the TAYLORs were >$56, they may go back, I'll let you know.
LS-1 KoolSox-3/4"x 8" (Gen-3).......07501 $37.35 (pkg of 8)
The sock provides an easily visible way to detect potential burn areas before they occur. The sock absorbs the burn instead of the wire so no misfire occurs. An adjustable ring allows the unique sock to be rotated enhancing it's longer life. Soft, very flexible, easy to handle and install. Adapts and stretches over irregular surfaces.
http://www.koolmat.com/wire.shtml
P.A. Grinnell Co.
P.O. Box 985
Mooresville, NC 28115
Fax: 704.662.9109
Phone: 704.662.9099
Toll Free: 877.566.5369
later,
