ECS Torque Tamer question...
Thread Starter
Pro
Joined: Jun 2003
Posts: 701
Likes: 17
From: Calabash, NC
ECS Torque Tamer question...
Should the hoop be installed under or over the wire harness that runs down the torque tube? Every fiber of my automotive background says under so it doesn't pinch it, but then its more than "just touching or clearing" the tube. The harness will "preload" the hoop on the tube a bit. There's no mention of positioning anywhere in the online instructions, or in the few threads I've dug up. I'll be lowering the rear cradle to ease installation, so either way will be possible. Just don't want to do it again if it's not right.
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,224
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Do not pinch the harness in there! That would cause a see of problems in no time. You want the tube to just touch the tube, not pulling on it at all.
