When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Was cleaning out my garage and ran into this. My damper been is my car for over 12yrs. Just want to share for all the little guys that cant toque it down 500ft lbs. Dont worry it will be ok. im 5'7 130lbs thank god back then thinks where easier.
I've never torqued mine. Got an ARP bolt, turned the impact on high (its not one of the new 600ft/lb+ impacts!), and it's never spun or come loose. I've made several cam changes, and the press fit is still tight, and no radial lines indicate it's never spun. Works for me. Pretty tough to strip a hardened 3/4-16 thread in a forged steel crank......
130Lbs
