got the "Pull Key Wait 10 secs" message
Thread Starter
Pro
Joined: Dec 2013
Posts: 627
Likes: 181
From: west coast of Canada
got the "Pull Key Wait 10 secs" message
I installed the LMC5 a few months ago. Got the "Pull Key Wait 10 secs" message today, first time. Will cutting the brown wire solve this issue?
Thanks in advance.
Thanks in advance.
Melting Slicks
Joined: Oct 2007
Posts: 2,375
Likes: 426
Don't cut anything!
Did you pull the key and wait 10 seconds?
The NJ State Inspection station got this message when they screwed up moving my car from one spot in the inspection line to another. Then they continued to screw it up more trying to move it again.
Finally they called me over and I pulled the key, counted to 10 and it started. And has ever since.
I passed inspection.
Did you pull the key and wait 10 seconds?
The NJ State Inspection station got this message when they screwed up moving my car from one spot in the inspection line to another. Then they continued to screw it up more trying to move it again.
Finally they called me over and I pulled the key, counted to 10 and it started. And has ever since.
I passed inspection.
Instructor
Joined: Sep 2021
Posts: 198
Likes: 115
From: North Carolina
My 2¢
Thread Starter
Pro
Joined: Dec 2013
Posts: 627
Likes: 181
From: west coast of Canada
Don't cut anything!
Did you pull the key and wait 10 seconds?
The NJ State Inspection station got this message when they screwed up moving my car from one spot in the inspection line to another. Then they continued to screw it up more trying to move it again.
Finally they called me over and I pulled the key, counted to 10 and it started. And has ever since.
I passed inspection.
Did you pull the key and wait 10 seconds?
The NJ State Inspection station got this message when they screwed up moving my car from one spot in the inspection line to another. Then they continued to screw it up more trying to move it again.
Finally they called me over and I pulled the key, counted to 10 and it started. And has ever since.
I passed inspection.
Thread Starter
Pro
Joined: Dec 2013
Posts: 627
Likes: 181
From: west coast of Canada
Thanks.
Thread Starter
Pro
Joined: Dec 2013
Posts: 627
Likes: 181
From: west coast of Canada
Don't cut anything!
Did you pull the key and wait 10 seconds?
The NJ State Inspection station got this message when they screwed up moving my car from one spot in the inspection line to another. Then they continued to screw it up more trying to move it again.
Finally they called me over and I pulled the key, counted to 10 and it started. And has ever since.
I passed inspection.
Did you pull the key and wait 10 seconds?
The NJ State Inspection station got this message when they screwed up moving my car from one spot in the inspection line to another. Then they continued to screw it up more trying to move it again.
Finally they called me over and I pulled the key, counted to 10 and it started. And has ever since.
I passed inspection.
I'd prefer not to cut anything but if the message keeps recurring, I'll probably do the brown wire mod.
Pro
Joined: Dec 2021
Posts: 547
Likes: 230
When you did the brown wire mod, did you cut the brown wire that you just installed into large pink BCM connector? Compliance Parts says to cut the LMC5 short brown wire loop. I'm assuming that CP means the loop formed by the brown wire that you just installed, is that correct?
Thanks.
Thanks.
Thread Starter
Pro
Joined: Dec 2013
Posts: 627
Likes: 181
From: west coast of Canada
No. There is an actual brown wire loop coming out of the LMC5 module. Cut that loop and cap both ends. You have to connect the brown wire with the metal end on it into the big pink plug as shown on the diagram. The metal end is covered by the black cap until the mod is done.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Oct 2007
Posts: 2,375
Likes: 426
Instructor
Joined: Aug 2021
Posts: 101
Likes: 17
From: Las Vegas, Nevada
https://www.corvetteforum.com/forums...s-battery.html