2003 Corvette ECBM issues
Thread Starter
1st Gear
Joined: Oct 2022
Posts: 1
Likes: 0
2003 Corvette ECBM issues
I have an 03 Vette and getting the dreaded ABS and Traction Control issues..I removed the ECBM and soldered the 5 points and reinstalled the unit..With key on engine off..I am able to use traction control and competitive driving mode comes up..Soon as I start the engine it goes back to ABS light on and maintenance messages for Traction Control and Service ABS...I have done removed all 4 tires and cleaned and put dialectic greases in all connections at the wheels. Anyone have any idea where to go next?
Last edited by TerryFord; Oct 17, 2022 at 07:17 PM. Reason: add picture
Melting Slicks
Joined: Jul 2004
Posts: 3,294
Likes: 482
From: Brea CA
You need to retrieve the codes for the EBCM to find out what it is complaining about. Follow the instructions in the YouTube link below.
Post up the codes from the 28-TCS section so we can help diagnose the issue.
Gary
Post up the codes from the 28-TCS section so we can help diagnose the issue.
Gary
