Rear Tie Rod/Toe Link Replacements
Thread Starter
Racer
Joined: Jun 2019
Posts: 321
Likes: 10
From: Dallas, TX
Rear Tie Rod/Toe Link Replacements
Forgive me if there is already a thread on this, I looked but couldn't find anything relative to what im looking for. My 99 FRC rear tie rods/toe links are shot. It looks as if the OEM GM numbers are discontinued as well as the Moog replacements. What are you all using for a close to OEM replacement piece? I dont need a hardcore track replacement as I plan on swapping the entire drivetrain in the next year or so and dont want to end up with expensive parts I cant use with the new mods. So far the most reasonable solution ive found are the LG motorsports adjustable replacements for $370/pair. Any other suggestions? Thanks.
Advanced
Joined: Oct 2019
Posts: 64
Likes: 17
From: Massachusetts
Rear tie rod
Super, Here is some info on the rear inner rods.
https://www.corvetteforum.com/forums...e-rod-end.html
https://www.corvetteforum.com/forums...e-rod-end.html
Le Mans Master
Joined: Oct 2007
Posts: 9,700
Likes: 3,469
From: Akron Ohio
2025 Corvette of the Year Finalist - Modified
2024 C5 of the Year Winner - Modified
2023 C5 of the Year Finalist - Modified
2022 C5 of the Year Finalist - Modified
St. Jude Donor '09-'10-'11
I wonder if you could use the front outer rod ends with the longer C6 inner since the front outers are shorter than the rear.
Natchamp, how did your swap end up? Did you successfully grind the flats on the C6 inner to fit the cradle?
Natchamp, how did your swap end up? Did you successfully grind the flats on the C6 inner to fit the cradle?
